Chinese translation for "strain range"
|
- 应变范围
Related Translations:
- Example Sentences:
| 1. | According to the result of fatigue experiment , it gets fatigue traits of ti alloy tc11 , which is the relationship curve of the maximum loading strain range with fatigue life
根据疲劳试验结果，获得了tc11钛合金焊接接头的疲劳特性，即最大加载应变与疲劳寿命的关系曲线。 | | 2. | According to the measuring result of fatigue fracture fractal dimension , it gets the relationship curve of ti alloy tc11 welded joint fracture fractal dimension with loading strain range , and the method of fatigue life forecasting fatherly . 3
根据疲劳断口分维数的测量结果，获得了tc11钛合金焊接接头断口分维数与其疲劳寿命的关系曲线，以及断口分维数与最大加载应变之间的关系曲线，给出了进一步疲劳寿命预测的方法。 | | 3. | It can be noticed that both r and t specimens show initial hardening and subsequent softening at the strain amplitude higher than 0 . 8 % and cyclic softening from the beginning to fracture under strain amplitude less than 0 . 8 % at room temperature , and the cyclic flow stress was always lower in r specimen than in t specimen at the same strain range
且在相同的应变幅下， t向试样比r向试样具有更高的循环流变应力。此外，对r向及t向试样，低应变幅下呈现出循环软化现象是因为晶粒旋转导致循环软化；而在高应变幅下发生循环硬化是由于孪晶作用的结果。 | | 4. | The study on high - temperature low - cycle fatigue life and fatigue crack propagation life under multi - axial stress state shows that the fatigue life and fatigue crack propagation life can be characterized by the equivalent plastic strain range p , the equivalent creep strain range c and the equivalent strain range , and do n ' t exit notch dependency , non - notch - dependency equations being given in the paper
) _ c和当量应变范围( ? )进行多维应力状态高温低周疲劳总寿命及裂纹扩展寿命评价是可行的，且不存在缺口依存性。并给出无缺口依存性的疲劳总寿命评价方程。 | | 5. | Presents the microstructure evolution in aluminum a nd copper after deformation by cold rolling in the strain range of 10 to 50 % red uction using tem and points out three types of dislocation structures are typica l and two of them are common for both materials and these two common types are f ound in non - cube grains and can be distinguished by crystallographic orientatio n of dislocation boundaries in the grains and the third type of structure is obs erved in cube grains , and concludes that grain orientation is important in deter mining the structure type but some other metallurgical parameters also have a ro le to play
采用tem对冷轧多晶铜与多晶铝的形变显微组织演变进行了对比研究.结果发现：多晶铜及多晶铝形变显微组织中均含有三类典型的位错结构类型，其中的两种结构特征在两种材料中是相似的，这两种类型结构存在于非立方取向晶粒，可通过晶粒中位错边界的晶体学取向加以区别，另一类型结构存在于立方取向晶粒；晶粒的晶体学取向决定了其形变显微组织类型，但其它冶金学因素对显微组织也有影响 | | 6. | Through studying the working mechanism of the composing , the paper referred the bearing ' s analyzing model and designing flow . through shearing test of high damping rubber , the paper analyzes the influence of shearing shape , shearing strain range and inspiriting frequence on the characteristic parameters ( dynamic shear elastic module , dissipation engineering module , wasted gene ) . according to the rule of equivalent energy , the paper gets the hysteretic curve of hdr ' s equivalent bilinear model and parameters ' calculating formula
本论文通过对这种分离式减震支座各组成部分工作机理的研究，提出了该分离式减震支座整体的计算分析方法和设计流程；通过高阻尼橡胶剪切试验，分析了高阻尼橡胶剪切面形状、剪应变幅值、激励频率和试件高度对特征参数(动态剪切弹性模量、耗能模量、损耗因子)的影响。 | | 7. | And finally , sem has been used to characterize the fracture . the results indicate that the relationship between the fatigue lifetime and cyclic plastic strain range obeys coffm - manson relation , and the relation between the hysteresis energy ( wn ) and the plastic strain range ( p ) can be described by a power - law : wh = h pw
但在室温下， r向及t向试样具有相同的循环特性，均表现为随应变幅的不同而不同，当应变幅高于0 . 8时，呈现出先循环硬化而后循环软化直至最后断裂的现象。 |
- Similar Words：
- "strain potential" Chinese translation, "strain pre ure tra ducer" Chinese translation, "strain pressure transducer" Chinese translation, "strain quadric" Chinese translation, "strain quantity" Chinese translation, "strain rate" Chinese translation, "strain rate component" Chinese translation, "strain rate dependence" Chinese translation, "strain rate effect" Chinese translation, "strain rate history" Chinese translation
|
|
|
